Connection of GPS-receiver GlobaSat BU-353 / BU-353s4 / BR-355s4/MR-350s4

Driver installation (excerpt from the document "GPS-receivers GlobaSat BU-353s4 / BR-355s4/MR-350s4. USER'S GUIDE"):

1.Insert the supplied CD into the drive. If the CD Autorun is disabled, then run the file «auto.exe» on the CD.

2.In the opened window click «InstallDriver». Process of installation of the driver will begin. Follow the program instructions.

3.Connect the GPS-receiver to computer USB-port (OS should be loaded). For connection of GPS-receivers BR-355s4 and MR-350s4 it is necessary to use a special cable-adapter of GlobalSat manufacture (Figure 1).

4.Further it is necessary to define number of the COM port for work with the receiver. Choose "Start" -> "Settings" -> "Control Panel" -> "System" -> «DevicesManager» and find the item «Ports (COM and LPT) ». By clicking on the «+», you will see a line of a following kind: «Prolific USB-to-serialCommPort», and in brackets - corresponding COM-port (usually СОМ3, COM4, COM5 …).

5.Now you have to set the value of a new COM port in cartographical or navigation software which will use with the GPS-receiver (GIS Panorama 11, GIS Panorama Mini, GIS Navigator 2011 …).

After installation of drivers for device GlobalSet in the task "GPS/GLONASS monitor" you must act in accordance with the Help topic "Order of actions at connection of GPS\GLONASS receiver to COM-port".