State

This menu item contains the settings:

- view of elevation model;

- surface view;

- heights of a relief;

- filter of cloud of points;

- image of 3D-tiles;

- image of three-dimensional objects;

- specifying a visibility range of three-dimensional objects.

Model of the relief can have the view:

Full - it is recommended for demonstrating the regular models of a relief (matrixes of heights) and the cloud of points containing mainly points of the terrain;

Nodular - it is recommended for demonstrating a cloud of points containing points  of the terrain, buildings, vegetation and other terrain objects.

The model's surface can have view:

Normal - onto a surface the image of a two-dimensional map is imposed that corresponds to the composition of data and composition of displaying, customized in the menu item of Composition of displaying 3D-model;

Transparent - the model's surface becomes transparent, allowing to see the objects which are located under the ground;

None - displaying the surface is disabled.

Relief of surface can be changed: specifying a scale of a relief from 0 % up to 800 % is possible. This menu item is active only in the presence of an open matrix of heights.

Cloud of points is active at presence in the data list of mtd-models containing a cloud of points. The cloud of points can be displayed as a Model, Relief or Not displayed. The mode allows to display in a three-dimensional form a cloud of points of any volume. If the points have not only high-altitude, but also the color data, this data is also used for 3D-displaying. Otherwise, the model is displayed in the colors of the altitude palette.

The filter of cloud of points is active at presence in the data list of the mtd-model containing a cloud of points. It is used for removal of points with high-altitude emissions. The filter by a cloud of points can be assigned as:

Absent - the model is displayed without filtration by a height;

Coarse - the filtration deletes points of individual hindrances (emissions by height);

Average - filtration deletes more hindrances;

Fine - filtration deletes points of the individual and linear hindrances caused by objects such as power lines.

Option the Image of 3D-tiles from a DB is active when databases containing 3D tiles are open. Enabling or disabling this option allows you to adjust the visibility of open data without their physically closing/opening.

Three-dimensional objects can be displayed in a following image:

Normal - objects have image, specified in the classifier;

Skeleton - objects have a wire-frame view;

None - display of objects is disabled.

At using the option the Objects image - To have no 3D-view, the objects of a two-dimensional map which do not have a 3D-view, are displayed on three-dimensional model by contours.

At use of option the Full visible range there is enabled the full visibility of all objects, regardless of their distance from the observer. Turning off this option reduces the visibility range of objects, but increases speed of displaying 3D-model.