Setting up the information interaction between software GEO-RTK and the task «GPS/GLONASS-monitor» GIS Map2011

Previous Top Next

1. Connect to COM- or USB-port of the personal computer the geodetic receiver of equipment "Research".

2. Install on a computer the software GEO-RTK. In program GEO-RTK set up the connection with the geodetic receiver of equipment "Research".

3. Edit the text file _Research_.ini, located in a folder with installed software GEO-RTK. In the file _Research_.ini (C: \Program Files \GEORTK \_Research_.ini) in section [FormNMEA] it is necessary for parameter ClassWindowsRecieveMsgsNMEA to set the value TGpsForm.

 

Fragment of the file _Research_.ini:

[FormNMEA]

ClassWindowsRecieveMsgsNMEA=TGpsForm.

 

4. In the dialog «Setting up of parameters of the transfer channel of NMEA-messages» of software GEO-RTK specify the messages of format NMEA 0183 which will be transferred into GIS Map2011. Dialog «Setting up of parameters of the transfer channel of NMEA-messages» is started by means of item of the main menu of program GEO-RTK «Setup-> Channel RS-232C for transfer of NMEA-messages».

5. Start the program GIS Map2011 and run the mode «GPS/GLONASS monitor». In dialog « GPS/GLONASS monitor» go to the bookmark Connection.

6. In dialog «GPS/GLONASS monitor» specify in group Used port the type of port - COM.

7. In dialog «GPS/GLONASS monitor» specify the update rate to port for updating the information received from the device. By default the update rate to port is equal to 1 second.

8. In dialog «GPS/GLONASS monitor» in the list of devices choose a line «GeoRTK».

9. Install interaction with software GEO-RTK, having clicked by the Open button. (Accordingly, the Close button breaks off connection.) At successful connection with software GEO-RTK the dialog «GPS/GLONASS monitor» immediately begin to receive messages in format NMEA 0183, which are displayed on the Input bookmark.